Features:
Four channels, each channel supports QC 3.0 fast charge protocol, can support fast charge at the same time, can output 5V 9V 12V (requires mobile phone protocol support) voltage, output current is adaptive, single channel power consumption 24W, 4-channel module power consumption 96W , PCB adopts FR-4 1.6mm board thickness design, optimized layout and wiring, tight design, open window on the back for heat dissipation, low full load working temperature, standby current 0.013A, module has output voltage compensation function.
note:
This module is a 4-way pressure drop fast charging module, please use 12V-30V DC power supply, and the positive and negative poles cannot be reversed.
Module features:
1. Built-in synchronous switch step-down converter chip
2. Input voltage range: 4.5V to 32V (The input voltage must be higher than the output voltage because it is a voltage drop module)
3. Output voltage range: 3V to 12V, automatically adjusted according to the fast charge protocol
4. Output power: 24W (4V@3.6A, 5V@3.4A, 9V@2.5A, 12V@2A, etc.)
5. Wired output voltage compensation
6. The output has CV/CC characteristics (output current is less than the set value, output CV mode; output current is greater than the set value, output CC mode)
7. Conversion efficiency reaches 97%
8. Soft start function
9. 220Khz switching frequency
Output fast charge:
1. Support BC1.2, Apple, Samsung agreement
2. Support Qualcomm QC2.0 and QC3.0
3. Support MTK PE1.1/PE2.0
4. Support Huawei Fast Charge Protocol FCP
5. Support Samsung Quick Charge Agreement AFC
6. Support Spreadtrum fast charge protocol SFCP
Multiple protection, high reliability:
1. Output overcurrent, input overvoltage, input undervoltage, output short circuit protection
2. Over-temperature protection of the whole machine
3. ESD 4KV, DC withstand voltage 48V
use:
Car charger, fast charge adapter, smart power strip, solar charger, etc.
All four USBs support fast charge protocol, and all output 5V 9V 12V voltage.
The USB output voltage depends on your device. The output voltage of different devices is different. The conventional USB output voltage is 5V. It can output different fast charging voltages following the QC protocol. The general fast charging voltage of mobile phones is 9V 12V, and some devices support 5V high current fast charging. , Low-current charging for devices that do not support fast charging.
