KIKUTANI Guitar Hanger Ukulele Hanger Can Be Installed On a Metal Rack Parts Pack for 3 Hangers GH-RA

Product Description

This is an optional part for installing guitar hangers and ukulele hangers on metal racks. Easy to install in 3 steps. Can be installed with one screwdriver. The parts are made of safe steel. It is fixed by clamping, so there is no need to process the metal rack. It can also be installed at the cross points of a sturdy lattice metal net by using 3 sheets. It is a pack of 3 hangers for 2 sheets and 2 hangers for 3 sheets. * Please note - There is a risk of scratches on the metal rack or commercial net display when installed. If you are concerned about scratches, please install it with a cloth or other protective covering. - When installing, be sure to check the load capacity and balance of the metal rack or commercial net display. We are not responsible for any scratches or damage to the metal rack or commercial net display, any scratches or damage to this product or instruments, or any injuries caused by such scratches or damage. - When hanging a guitar, be sure to check that there are no problems with the balance. We recommend using it as low as possible, but if using it at a high position, please be careful that the rack does not tilt.

・We recommend installing it on a strong part of the metal rack that has a support post. Please note that if you install it on a part without reinforcement, the weight of the guitar may cause the metal rack to bend.

Optional parts for installing guitar hangers and ukulele hangers on metal racks Pack of 3 hangers (6 plates / 12 fixing bolts / 12 fixing washer nuts) Compatible hangers: GH-240S / GH- 240 / UH-240S / UH-425 If you use 3 plates, you can attach it to the metal mesh of the lattice in addition to the metal rack. Note: When hanging the guitar, be sure to do so. Please make sure there is no problem with the balance. We recommend using the rack as low as possible, but please be careful that the rack does not tilt when using it in a high position.